STAINLESS STEEL PRODUCTS2020lpl春季赛下注,全球总决赛英雄联盟下注,英雄联盟决赛押注
Products can be certified to the following specifications:
- ASTM A240/A240M
- ASME BPVC IIA SA240/SA240M
- EN 10088-1
- EN 10088-2
- EN 10088-4
- EN 10028-7
- EN 10095
- SANS 50028-7
- IS 6911
Regardless of the specification and tolerances required by the customer, all certificates are issued in terms of EN 10204. The following certificates are available:
|EN 10204||Description||Conditions of Issue|
|3.1||Internal Independent Inspection||Issued unless otherwise specified|
|3.2||External Independent Inspection||On request to TüV accreditation|
|2.2||Test Report||Analysis only|
?Certification to Pressure Equipment Directive (PED 2014/68/EU)
Certification to PED 2014/68/EU is available on accredited grades and thicknesses according to the scope of certification, which is available on the downloads page with the PED 2014/68/EU Certificate.
Certification to AD 2000 W2 (TüV)
Certain approved steel types manufactured to EN 10028-7 (Only No.1 and cold rolled finishes) are certified to AD 2000 W2 & AD 2000 W10 (TüV certification), with the approval of TüV Rheinland. The certificate stating the approved types can be downloaded from the downloads page, under Certifications.
For gauges thicker than 30mm, as covered under 3.1 + AD 2000 W2/W10, 3.2 Certification (external TüV approval) are available on request.
Certification to Construction Product Regulation / CE mark (EN 10088-4)
CE mark certification to EN 10088-4 is available on material up to the maximum gauges specified in the scope of certification, as approved by TüV Rheinland, which can be downloaded from the downloads page as “CPR 305/2011/EU Certification”.
Certification to BIS (IS 6911)
Certification to IS 6911 is available according to the scope of certification, which can be downloaded from the downloads page as “BIS Certification Mark License”.